Contents - Index - Previous - Next

Florida QSO Party

FL stations work everyone and send RST and county. Multipliers are the 50 US states + DC + 13 VE mults + DXCC, per mode - CW and PH.

Mobiles: Change your sent county in the logger when you log QSOs in a different county. You can do this without exiting the logger.

States and Provinces are 2 characters only. Entering an exchange >2 characters, GenLog assumes it is a Florida county and skips the multiplier check function.

When FL stations work your own state, you can edit the log file to have GenLog count Florida as a multiplier, since counties are not counted.

Others work Florida only and send RST and state/DC/province/DXCC. Multipliers are the 67 Florida counties, per mode - CW and PH. Work county line stations as 2 separate QSOs.

QSO points: CW = 2  PH = 1. Work stations on both modes.

Power mults: 3 for 5W or less, 2 for 150W or less and 1 if more than 150W was used. Click the [Multi/Bonus] button to setup TX power multiplier.

Score = (QSO points  X  mults)  X  the TX power multiplier.

County abbreviations are normally the first three letters of the county. Check the list for exceptions.
Datafiles required: