DVK

Contents - Index - Previous - Next

DVK

F-Key <F9> key can be configured to:
1. Send the normal saved wave message for <F9>.

2. Call the station entered in the call sign input field. The call sign is sent (using alpha.wav files) followed by the standard <F9> message. Select the [Send Call+] switch in the DVK setup. Using 36 sound card wave files {a.wav, b.wav, 5.wav, etc.}, GenLog calls the wave file corresponding to the letter/number in the call. Use the sound card software to record and save the 36 files.

F-Keys <F10> and <F11> are for normal messages

F-key <F12> can be configured to:

1. Send the normal saved wave message for <F12>.

2. The <F12> message is repeatable after a specified delay time. While in TX or delay modes, the repeating function is cancelled by hitting the <Space bar>. The message continues to the end. In the 16-bit logger, use a PTT disable switch to stop the transmission if required.

In newer versions of GenLog - in the `RIGblaster` mode, a DVK playing message and <F12> repeating message can be cancelled at any time using the <Esc> <Space> or <Enter> keys. The PTT disable switch is not needed.

See more about the DVK in the main HELP file {Gen_log.hlp}.