From: [email protected]
Date: Thu Dec 16 1999 - 05:27:57 PST
Eric,
Another possibility would be to use AVX Low Pass Filter Arrays, see
http://www.avxcorp.com/pdf/lpfarray.pdf These put four isolated
resistors, each with a distributed capacitor, into a 1206 (0.128" x 0.063",
3.25mm x 1.60mm) surface-mount package. The datasheet says that resistor values
from 10- to 1000-ohms +/-10% and capacitor values from 10 to 100pF +/-20% will
be available. This is a brand new line for AVX, so they don't have standard
values available yet, but I received some Z3F43Y120M101MAT samples with
100-ohm resistors and 12pF capacitors from them. The Product Marketing Manager
is
Joseph M. Rana
AVX Corporation
810 17th Avenue South
P. O. Box 867
Myrtle Beach, SC 29578-0867
(843)444-2889 phone
(843)626-3123 fax
[email protected]
http://www.avxcorp.com
John Barnes Advisory
Engineer
Lexmark International
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:08 PST