From: yaserh ([email protected])
Date: Sat Oct 28 2000 - 00:50:32 PDT
Hi,
* I need to ask if i have a PCB board with analog and digital circuits, is it's right to connect the digital and the analog GND to the GND layer or i must create two Gnd layers and connect them at the Gnd entery point to the board.
* I need to know how can i select the value of my fuse instaled on the primary side of 220 VAC transformer to compabtible with the UL standard. I have a board with transformer of 12 VA and 220 VAC input and it uses a fuse 3.15 A how the designer of this board select this fuse.
Waiting for reply
With my best regards
Yasser El-haddad
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:53 PDT