|
Power Consumption: |
13.8 VDC | 117 VAC |
|
RX (no signal) |
2.3 A | 70 VA |
|
RX (signal) |
2.7 A | 80 VA |
|
TX (100 W) |
20 A | 450 VA |
|
Supply Voltage: |
117 VAC and 13.8 VDC |
|
Dimensions (WHD): |
16 x 5.3 x 13.7 inches (410 x 135 x 347 mm) |
|
Weight (approx.): |
33 lbs. (15 kg.) |
|
0 | |
|
TRANSMITTER | |
|
Power Output: |
Adjustable up to 100 watts (25 watts AM carrier), |
|
Class A mode (SSB): |
25 watts maximum |
|
Duty Cycle : |
100% @ 50 watts, |
|
0 |
50% @ 100 watts (FM & RTTY, 3-minute TX) |
|
Modulation Types : SSB: |
J3E Balanced, |
|
AM: |
A3E Low-level (early stage), |
|
FM: |
F3E Variable reactance, |
|
AFSK: |
J1D, J2D Audio frequency shift keying |
|
Maximum FM Deviation: |
?.5 kHz |
|
FSK Shift Frequencies: |
170, 425 and 850 Hz |
|
Packet Shift Frequencies: |
200 and 1000 Hz |
|
Harmonic Radiation: |
Better than -60 dB (Typical) |
|
SSB Carrier Suppression: |
At least 40 dB below peak output |
|
Undesired Sideband Suppression: |
At least 55 dB below peak output |
|
Audio Response (SSB): |
Not more than -6 dB from 400 to 2600 Hz |
|
3rd-order IMD: |
- 31 dB @ 100 watts PEP, or better |
|
0 |
(Class A mode) - 40 dB @ 25 watts PEP (Typical) |
|
Microphone Impedance: |
500 to 600 Ohms |
| 0 | |
| RECEIVER | |
|
Circuit Type: |
Quad-conversion superheterodyne (triple conversion for FM) |
|
Intermediate Frequencies: |
0 |
|
Main RX: |
70.455 MHz/8.215 MHz/455 kHz, |
|
Sub RX: |
47.21 MHz/455 kHz |
| Sensitivity : | ||
|
Modes |
0.5 - 1.8 MHz | 1.8 - 30 MHz |
|
SSB/CW (2.0 kHz) |
2 uV | 0.16 uV |
|
AM (6 kHz) |
13 uV | 2 uV |
|
FM |
- | 0.5 uV |
| (with preamp on, IDBT on, SSB/CW/AM for 10 dB S/N, FM for 12 dB SINAD, 0 dB u = 1 uV) | ||
| Selectivity (-6/-60 dB) : | |||
|
Bandwidth |
Modes | Min. -6 dB BW | Max. -60 dB |
|
2.4 kHz |
all except FM | 2.2 kHz | 4.2 kHz |
|
2.0 kHz |
all except FM | 1.8 kHz | 3.6 kHz |
|
500 Hz |
CW/RTTY/Packet | 500 Hz | 1.8 kHz |
|
250 Hz |
CW/RTTY/Packet | 250 Hz | 700 Hz |
|
0 |
AM (Wide) | 4 kHz | 14 kHz |
|
0 |
FM | 8 kHz | 19 kHz |
|
IF Rejection (1.8 ~ 30 MHz): |
80 dB or better (Main RX), 60 dB or better (Sub Rx) |
|
Image Rejection (1.8 ~ 30 MHz): |
80 dB or better (Main), 50 dB or better (Sub) |
|
Maximum Audio Output: |
2.0 W into 4 Ohms with <10 % THD |
|
Audio Output Impedance: |
4 to 8 Ohms |
| Specifications are subject to change, in the interest of technical improvement, without notice or obligation. | |
Send e-mail to mailto:[email protected]
