HackRF driver for Linrad

========================================================================

Changes to the Linrad source code r468 to make the
  HackRf ONE
available as a receiver to Linrad.

* tested on linux 32bit & 64bit
* you must have libhackrf0.so or propably libhackrf.dll in windows
* gain settings currently use the same tables for LNA & VGA,
  with AMP disabled in linear mode and engaged in sensitivity mode.
* gain settings are echoed to the left of the screen,
  close to the default baseband position.
* Samplerates 5, 3.5 and 2 MS/s supported.
* Crystal offset correction supported.

Since the Linrad project does not define tags in its SVN repository,
you must be careful in applying the patches and care for any rejects.

As no release tags exist, i decided for these patches to be against
  trunk r468
which was HEAD at June 1st, 2015, following release 4.06 of Linrad.

========================================================================

--------------------------------------------------------------
Find the patch and instructions in the file lirpatch-468-2.zip
--------------------------------------------------------------
Find more info on the HackRF and Amateur Radio.
--------------------------------------------------------------

Please keep me informed of any changes and suggestions to this patch.
73, martin - DK4MA (AT qsl DOT net)