MeteorRX receiver measurements - 2026-11-09 11:24
Receiver: RTLSDRBlog Blog V4 SN 00000001  [rtlsdr|RTLSDRBlog|Blog V4|00000001]
Settings: rtlsdr|gain 38.6|1200000|137.500

Point 1: input   -70.0 dBm ->  -60.05 dBFS, C/N0  21.4 dBHz, f 137.898821 MHz (-8.55 ppm), ADC peak 100%  !! tone only 6.0 dB above the noise in a 18 Hz bin
Point 2: input   -90.0 dBm ->  -57.82 dBFS, C/N0  23.6 dBHz, f 137.903110 MHz (+22.55 ppm), ADC peak 100%  !! tone only 5.4 dB above the noise in a 18 Hz bin
Point 3: input  -110.0 dBm ->  -58.19 dBFS, C/N0  23.5 dBHz, f 137.903712 MHz (+26.92 ppm), ADC peak 100%  !! tone only 5.2 dB above the noise in a 18 Hz bin
Noise (generator off):  -81.22 dBFS/Hz  ->  -112.54 dBm/Hz, NF 61.4 dB

=== Receiver calibration WITH WARNINGS ===
K = -31.31 dB   (P[dBm] = P[dBFS] + K)   slope -0.046 dB/dB
Residuals: -70.0 dBm: +21.36 dB, -90.0 dBm: -0.87 dB, -110.0 dBm: -20.49 dB
Noise floor -112.54 dBm/Hz -> receiver NF 61.4 dB
  noise in LRPT 72k channel: -62.2 dBm
  noise in 2.4 kHz: -78.7 dBm
Frequency error +22.55 ppm (ini: ppm = +0.00)
  - linearity: slope -0.046 dB/dB (expected 1.000 +/- 0.05)
  - highest level reads 21.36 dB low: compression - lower the RF gain or the level
  - -70.0 dBm: tone only 6.0 dB above the noise in a 18 Hz bin
  - -90.0 dBm: tone only 5.4 dB above the noise in a 18 Hz bin
  - -110.0 dBm: tone only 5.2 dB above the noise in a 18 Hz bin
Saved in C:\Users\darre\Desktop\MeteorRX\data\calibration.json
Calibration saved for receiver 'RTLSDRBlog Blog V4 SN 00000001' (settings: rtlsdr|gain 38.6|1200000|137.500).
Preamp gain: input -110.0 dBm -> -58.20 dBFS, gain +20.48 dB  !! tone only 5.3 dB above the noise in a 18 Hz bin
Preamp lin: input -80.0 dBm -> -59.52 dBFS, gain -10.84 dB  !! tone only 4.6 dB above the noise in a 18 Hz bin
Preamp noise (generator off): -81.59 dBFS/Hz

=== Preamplifier 'Preamp 137 MHz' ===
Gain at -110.0 dBm input: +20.48 dB
Gain at -80.0 dBm input: -10.84 dB  (difference -31.32 dB: compression)
System NF with preamp 40.58 dB, receiver alone 61.4 dB
Preamp NF (Friis) 0.00 dB  (below the resolution of the method (< ~0.3 dB))
Note: the gain method assumes a 290 K source (generator output off, attenuator at maximum).
Preamplifier 'Preamp 137 MHz' in service on 'RTLSDRBlog Blog V4 SN 00000001'