ISN

Third Party Communications Section 97.115 of the Commission's Rules, 47 C.F.R. §97.115

Authorizes an amateur station regulated by the FCC to transmit a message from its control operator (first party) to another amateur station control operator (second party) on behalf of another person (third party).

No amateur station, however, shall transmit messages for a third party to any station within the jurisdiction of any foreign government whose administration has not made arrangements with the United States to allow amateur stations to be used for transmitting international communications on behalf of third parties.

The following countries have made the necessary arrangements with the United States to permit an amateur station regulated by the FCC to exchange messages for a third party with amateur stations in: Antigua and Barbuda, Argentina, Australia, Belize, Bolivia, Bosnia-Herzegovina, Brazil, Canada, Chile, Colombia, Federal Islamic Republic of Comoros, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, The Gambia, Ghana, Grenada, Guatemala, Guyana, Haiti, Honduras, Israel, Jamaica, Jordan, Liberia, Republic of the Marshall Islands, Mexico, Federated States of Micronesia, Nicaragua, Panama, Paraguay, Peru, Philippines, St. Christopher and Nevis, St. Lucia, St. Vincent and the Grenadines, Sierra Leone, South Africa, Swaziland, Trinidad and Tobago, Turkey, Uruguay, and Venezuela.

** United Kingdom; (Note: Only special event stations with call sign prefix GB followed by a number OTHER than 3)

The United Nations also has arrangements with the United States to permit an amateur station regulated by the FCC to exchange messages for a third party with amateur stations 4U1ITU in Geneva, Switzerland, and 4U1VIC in Vienna, Austria.

No amateur station regulated by the FCC shall transmit messages for a third party to any amateur station located within the jurisdiction of any foreign government not listed above.

This prohibition does not apply to a message for any third party who is ELIGIBLE to be the CONTROL OPERATOR of the station.