22 June 2018
	What I was worried about became a reality. The UZUSIONET server will be out of service at 12:00 on July 31st.
I don't use UZUSIONET in my program, so I don't think there will be any problems. However, we also do so, but as for the digital site
will need to switch work so I used to. In my case, UZUSIONET is not used as the transfer server for the transmitted image, but
most people think that if the digital site is UZUSIONET, the transfer server for the transmitted image is also UZUSIONET.
These people must set up a new server if they want to transfer the transmitted images to their own server.

Currently, there are FC2 and TOK2 servers that can be used for free, but there are various restrictions (for example, videos are not good), 
so please check carefully before
using. In addition, unlike QSL.net, all services of UZUSIONET will be terminated. If you are operating the Web, you may
need to relocate .

In addition, although it is our program, if you stop uploading to the Digisite and transfer the image to the HYBRID server, you
can use it without setting another server . However, Digisite cannot be used. Also, the beacon does not use the user server, so it
can be sent.

I'm going to be busy resetting the Web, changing master data, etc.

The master will be changed, but if you contact us in June, we will change it immediately. After that, the registered contents of the Digisite
Please understand that it will be corrected after July 24th while watching. First of
all, please submit the registration change of the Digisite to Mr. Richard .

Authorities have also switched to FC2 (40m) and TOK2 (DX) for digital transformation. At the same
time as submitting the change application to Mr. Richard, he explained this matter. The authorities
have changed the master data of the Controller so that FC2 and TOK2 can also be used, although it remains as it is because the 
transmission image server uses a completely different server.