Elecraft K2 160-10M
CW/SSB Transceiver
Product Description (4/23/99)
Easy to Build:
K2 High Performance CW Base Unit, General
Features:
Receiver:
Preliminary K2 Performance Measurements
(14MHz Typical Values)
MDS(dbm) |
IMDDR3(db) |
Ip3(dbm) |
Ip2(dbm) |
BDR(db) |
-136/-131 |
96/97 |
+5/+10.7 |
+77/+78 |
125/133 |
XX/YY = preamp-on/preamp-off
results; See K2
Performance Comparisons for more details.
CW Features:
-
Full break-in CW.
- Built in keyer with 10
programmable memories and both popular iambic modes A and B.
- Sharp, variable bandwidth CW crystal filter (250 -
1750 Hz).
- Options for a fixed-bandwidth narrow crystal
filter or a wide-bandwidth crystal filter for tuning the band.
- Adjustable RX CW pitch with tracking TX side tone.
- Selectable opposite sideband RX for QRM reduction.
- Normal / Reverse paddle setting for Dot / Dash;
Manual Key setting.
- Efficient transmitter operation.
SSB Option:
|
Noise Blanker Option:
|
Auto-tuner Option:
|
High Power PA Option:
-
50W (100W under consideration) internal PA module.
(Either the 10W Auto-Tuner and Battery Options or
the High Power PA can be installed in the K2, but not both.
The PA has its own K2 top cover which replaces the standard
one. This way the PA can be swapped out with the Tuner /
Battery options which mount to the regular K2 cover.)
- SO-239 RF Connector
- Amplifier Keying Output
|
Aux I/O Option:
|
160M / RX Antenna Option:
-
Adds 160M TX/RX
- Switchable RX Antenna Input (all bands)
|
Other Options:
|
Other Options:
|
Return to:
QRP |