QSSTV can interface with other programs.

Flrig see flrigconfig

Cqrlog: QSSTV (when in DRM mode) sends the following information to Cqrlog:

program: identifies QSSTV
version: protocol version
date: based on UTC
time: based on UTC (time when the images is correctly received)
endtime: based on UTC (always = time)
call: call sign of the received station
mhz: frequency in MHz
mode: SSTV (ADIF restriction: there is no DSSTV nor DRM specified in ADIF, SSTV is the closest match)
notes: contains file name, DRM mode information (i.e mode, QAM, protection.. hybrid)

Setup:
Do not enable Run Fldigi ...
Start Cqrlog and select Remote mode for Fldigi
If you want to see the QSO's: Select "Show QSO list" from the file menu.

Note: Unless you configured the Automatic refresh, you will only see the QSO's if you hit the Refresh button.