Given recent events, here are a few joke images in response to some of the jokers in the USA:
Everyone has the following fundamental
freedoms: freedom of thought, belief,
opinion and expression, including freedom of the press and other media of
communication.
Contest Callsign VA7EU
Burnaby, British
Columbia, Canada
Grid CN89NG
IOTA Designator NA091 British Columbia Province South
CQ zone 3, ITU region 2 zone 2, DXCC zone 3, ARRL Section BC
SKCC 14302, NRR 336
BC Electoral District BNL, Federal Electoral district BNS
Maritime mobile operation on motor vessel Equinox http://www.mvequinox.ca/
Sorry, I am no longer sending QSL cards to the United States.
Activating AN/ARC-5 Transmitters from WW2
630m Sea and Land Portable Operation
630m Band Antenna Matching Using Just a Resistor
630m Band 30W Transverter – High Power Mixer, No PA
VHS Propagation: Radio Long Delayed Echoes and Video Recorders
A Spark Gap Transmitter with a Pure Note
Station Information
Radio Equipment IC-7300 Transceiver
160m-6m
IC-7410 Transceiver 160m-6m
Home brew 630m/472-479 kHz transmitter,
5W EIRP CW and digital
MOPA Transmitter for CW in the
AWA Bruce Kelley 1929 QSO Party
Colpitts power oscillator,
push-pull ’45 tubes, 160-20m
Power amplifier, push-pull
’45 tubes, 40-20m, 25W DC input
Heathkit DX-40 transmitter with
VF-1 VFO (1958-1960)
Yaesu FT-101B Transceiver
(1973)
T-19 and BC-458-A Command set
transmitters (from WW2)
Hallicrafters SX-71 receiver
160-6m (1949-1955, 13 tubes)
Hammarlund HQ-129-X receiver
160-10m (1946-1952, 11 tubes)
Antennas Inverted-L, 16 meters high, used on 630m and HF 160-10m
I enjoy building and experimenting with radio hardware, casual contesting, and operating tube rigs in vintage radio events. I have been a radio amateur since 1977. Until 1984 I operated 40 and 20 meter CW with home-built transmitters from 15 to 700 watts and made use of the university club station VE7UBC. I took a break from radio as I became busy with my career and family. In 2002 I got back on the air with an old Kenwood TS-820S. That has been replaced by modern ICOM transceivers and a collection of tube radio equipment. On 630m I run a home-brew transmitter.
I am a partner in the construction and operation of the VA7MM 1296 MHz EME station, which has been in operation since 2003. See our web page at https://www.qsl.net/va7mm/. We are active during EME contests on CW and WSJT digital modes.
Now retired, by profession I was an electrical engineer and was self-employed in later years (Phasor Electronics Design). I designed custom wireless, analog, and microcontroller hardware for industrial applications.
Hallicrafters SX-71, ICOM IC-7300, Heathkit VF-1 and DX-40, Yaesu FT-101B,
Hammarlund HQ-129-X
MOPA Transmitter setup for AWA Bruce Kelley 1929 QSO party. Coils shown are for
20m. Type ’45 tubes.
AN/ARC-5 Transmitters from WW2, for 80m and 40m.
The first US amateur operation began on the 630m band in 2017 on Oct 14 after a few hams received UTC approval. All others who applied on Sept 16 had to wait until Oct 16 to start operation.
I participated in opening night activity and completed 5 CW and 4 JT9 QSOs with 7 different stations: AH6EZ/W7, W7WKR, W7IUV, W0YSE, W7RBN, N6LF, K5DNL. The first QSO was CW with Dick AH6EZ/W7. I made a CW “VVV” test transmission on 472.5 kHz that ended a few seconds after the clock passed 00:00 UTC Oct 16. Dick immediately gave me a call.
Since then it’s been good fun on the band, with everyone trying for 2-way QSOs with the stations they’ve been hearing on WSPR for the last few years. 2-Way operation is split between FST-4 and CW.
As of March, 2023 I’ve worked 48 different US stations as far as Hawaii, Alaska, Texas, Oklahoma, and Pennsylvania. Best DX in Canada is VE6CB in Alberta.
On Saturday evening, 0000 to 0430 Nov 12 UTC, I transmitted beacons and crossband CQs on 478.2 kHz for portions of each hour. I made crossband QSOs with VA7TA (BC) and W7YOZ (WA) 630m-to-80m, and K7CW (WA) 630m-to-160m. I also received reports by email and on low-band chat from VA7TA, WA7SMZ (OR), W7RH (AZ). VA3ELE tried listening for me but had no copy in Ontario.
Canadian hams CF7MM, VE7BDQ, CG7CNF, VE7SL, VO1NA, VE3OT provided 2-way crossband CW QSOs on Saturday night, transmitting on 630m while receiving on 160, 80, and 40m.
Transmitting on 630m as CG7CNF, I made crossband contacts with AH6EZ/W7, K7CW, CF7MM, W7FI, W6TOD, K6YK, VE7KW, VE6XH, VE7BGJ, K7SS, VA7JX, W9PL, KB5NJD, N7BYD, VE7BDQ
Six Canadian hams (VO1NA, VE3OT, VE7SL, VE7BDQ, VA7MM, VE7CNF) made crossband CW QSOs, transmitting on 630m and receiving on 160, 80, and 40m. US Experimental stations made QSOs and transmitted beacons on 630m. Maritime Radio Historical Society station KSM was active on 426 kHz.
Transmitting on 630m, I made crossband contacts with AH6EZ/W7, K7CW, KB7N, KG0VL, W0YSE, K6GZ, KR5D, NO3M, VA7JX, VE7BGJ, VE7PS, W7GKF, VA7MM, VE7BDQ.
Six Canadian hams (VO1NA, VE3OT, VE7SL, VE7BDQ, VA7MM, VE7CNF) made crossband CW QSOs, transmitting on 630m and receiving on 160, 80, and 40m. US Experimental stations made QSOs and transmitted beacons on 630m. Maritime Radio Historical Society station KSM was active on 426 kHz.
I made the following crossband contacts:
Feb 6, 2016: KU7Z, W0YSE, VE7KW, VE7BGJ, KG0D/7,
W6RKC and locals VE7BDQ, VA7MM.
Feb 7, 2016: K7CW, N7BYD, W0YSE, and locals VE7SL, VA7MM.
I also heard maritime station KSM on 426 kHz, and beacons from WD2XSH/20 on 472 and WG2XSV on 476.1. N6SKM and VE7JYH sent reception reports. My QRSS3 beacon was heard by K3ISM. The DX highlights of the weekend were crossband QSOs between VE7SL (Mayne Is., BC) and WA3TTS (Pittsburgh, PA) and NO3M (Saegertown, PA).
Six Canadian hams (VO1NA, VE7SL, VE7BDQ, VA7MM, VE7CA, VE7CNF) made crossband CW QSOs, transmitting on 630m and receiving on 160, 80, and 40m. US Experimental stations made QSOs and transmitted messages inside and outside the 630m band. Maritime Radio Historical Society station KSM was active on 426 kHz. KYVM on the “S.S. Red Oak Victory” was active on 425 kHz.
I made the following crossband contacts:
Nov 14, 2015 Crossband KK7UV, VA7MM, K6GZ, VA7TA, K6LG,
and 2-way 630m with VE7CA
Nov 15, 2015 Crossband K7CW, VE7KW, VE7BDQ, VA7DXX, W0YSE, K9FD/KH6
I also heard beacons from WD2XSH/20, WG2XSV, KSM and heard part of a signal report from California by KYVM, who managed to receive some of us. Mike Tuggle on Oahu, Hawaii received WH2XCR, WD2XSH/20, VE7SL, VE7BDQ, and VE7CNF using a single-MOSFET regenerative receiver and 38ft high inverted-L antenna.
FSK digital modes that are phase-continuous and of fixed amplitude will work through nonlinear power amplifiers. Such modes include WSPR, JT9, JT65, MFSK8, MFSK16, MFSK32, FM HELL, and RTTY. Some of us (WG2XSV, NU60, VE7BDQ, VA7MM and I) have tried beacon tests on 630m. John VE7BDQ and I have completed 2-way QSOs on 630m using JT9, WSQ, and RTTY.
FM HELL 245 beacons received by VE7CNF and WG2XSV:
MSFK16+SSTV Picture beacons received by VA7MM and WG2XSV:
VE7SL and I have completed a lightwave QSO between Mayne Island and Cypress Quarry Lookout, a line-of-sight path of 51 km. This was using CW with tones amplitude-modulated on deep red LEDs around 660 nm wavelength.
Experiments continue, with hopes to complete QSOs over longer paths and to use digital modes by cloud-bounce.
Do not attempt to do
any business with Phasor Electronics Design.
Phasor Electronics Design, my
old business, is closed as of June 2023.
Any web content or email address associated with phasordesign.com is not mine.
I
no longer own the domain and do not control it’s server. I deleted all web
content in 2023.
As of early 2024 my
old web pages at phasordesign.com have been restored without my consent.
(c) Toby Haynes, VE7CNF. 2015 - 2024