Rig: IC7300, Software: qsstv 9.5.11 - settings: Auto-Slant "off"; sensitivity "DX"; mode "Auto"
Signal will run until the end of the image before resynchronization when something resembling H-sync or VIS is demodulated, no matter what was the souce. It's like an open squelch, even if only fractions of an image were received, these can be viewed in the gallery; where the displayed aspect ratio corresponds to the respective mode.
When you see my images, TX-Power is about 100 Watt, find logging and QSL on qrz.com. Are you a qsstv user and curious about which sstv mode you receive most often? Follow this link!
Antennas:
10m Day and Night / 20m Night: 20-meter Deltaloop,
20m Day: 80-meter-Loop 6 meter AGL.
10m Day and Night / 20m Night: 20-meter Deltaloop,
20m Day: 80-meter-Loop 6 meter AGL.
No 24/7 monitoring! Thank you qsl.net for hosting.